Wrist Twisters

Wrist Twisters (https://www.wristtwisters.com/forums/forums.php)
-   Classifieds (https://www.wristtwisters.com/forums/f86/)
-   -   Parting Out 2004 919 (https://www.wristtwisters.com/forums/f86/parting-out-2004-919-a-81373.html)

CB700S 02-28-2020 03:32 AM

Parting Out 2004 919
 
I just picked up this parts bike, a 2004 919 with an alleged 30-40K on it. While I'm likely to keep most of the parts, I thought I would post up and let people know there may be parts available. The engine was reportedly blown, reason unknown. The bike has been crashed on the right side, with the usual pavement rash. May have been slowly dropped on left side, from the tank damage.



https://live.staticflickr.com/65535/...1980ecac_z.jpg


https://live.staticflickr.com/65535/...6f8c6202_z.jpg


https://live.staticflickr.com/65535/...9338e17f_z.jpg


More pictures here: https://flic.kr/s/aHsmLEELmW



Parts I know I am keeping: Forks, ECU, wiring harness, coils, wheels (but not front rotors), misc brackets and hardware, headlight/bucket assembly, throttle bodies, fuel pump assembly, throttle cables, brake hydraulics, regulator/rectifier, radiator.


Parts destroyed or missing and not shown in/contrary to pictures from what I've seen so far: right rear turn signal lens, midpipe, mufflers, muffler heat shields, windscreen, rear brake lever, handlebars, gas cap - I'm sure there's more but I can't think of any more of them at present.

Mazaev 02-29-2020 08:57 AM

Do you have left side pedal/shifter parts? Just put mine down and broke the shifter pedal stuff and ripped the coolant hose that has the coil around it.

Also, the left side rearset...

CB700S 02-29-2020 10:21 AM

Quote:

Originally Posted by Mazaev (Post 1363679)
Do you have left side pedal/shifter parts? Just put mine down and broke the shifter pedal stuff and ripped the coolant hose that has the coil around it.

Also, the left side rearset...




That coolant hose is No Longer Available - you will have to order a Samco silicone hose kit or special order just the hose from a Samco distributor to get a replacement: https://www.wristtwisters.com/forums...est-81005.html


The left pedal/shifter is part of the left rearset. I will go to the bike today and see what the left rearset looks like.

Sniper-x 03-01-2020 06:28 AM

That's so sad. That once proud, beautiful 919, reduced to what it now is.

CB700S 03-01-2020 06:36 AM

Quote:

Originally Posted by Sniper-x (Post 1363715)
That's so sad. That once proud, beautiful 919, reduced to what it now is.


It happens to almost all mass produced bikes - examples become parts bikes due to blown engines, crashes, etc. Unfortunate for those bikes, but good if they can keep others still viable as riders.

CB700S 03-02-2020 03:44 AM

Quote:

Originally Posted by Mazaev (Post 1363679)
Do you have left side pedal/shifter parts? Just put mine down and broke the shifter pedal stuff and ripped the coolant hose that has the coil around it.

Also, the left side rearset...


Here are pics of the left pedal/shifter/rearset assembly. I will need to keep the "insert" that backs the passenger peg and sits in the fin as well as the wire guard, but the rest is fair game. I believe that is rust/corrosion on the shift lever but it should clean up and be fine after some paint or powdercoat.


https://live.staticflickr.com/65535/...cb015e6f_z.jpg
IMG_0570






https://live.staticflickr.com/65535/...3f9ac5a7_z.jpg
IMG_0573




You can see the insert and guard I need to keep off the rearset here:
https://live.staticflickr.com/65535/...3888a23c_z.jpg
IMG_0576





https://live.staticflickr.com/65535/...39e28c6d_z.jpg
IMG_0580




https://live.staticflickr.com/65535/...91d0290e_z.jpg
IMG_0584




Here's the right side one, which is also available. Note the bent brake pedal; I will also be keeping the wire guard and insert on this side.


https://live.staticflickr.com/65535/...cca2c7a6_z.jpg
IMG_0588

CB700S 03-04-2020 06:52 AM

The entire left rearset including footpegs and gearshift mechanism is now gone/unavailable. I'll be adding posts on parts that are gone as I remove them for myself or people get them.

Fsjunky 03-05-2020 04:12 PM

How much would you want for both front disks shipped to 91910?

CB700S 03-05-2020 07:29 PM

Quote:

Originally Posted by Fsjunky (Post 1363819)
How much would you want for both front disks shipped to 91910?


Give me a couple days to get out to where the bike is stored and look them over, I will get back to you.

CB700S 03-14-2020 01:47 PM

Quote:

Originally Posted by Fsjunky (Post 1363819)
How much would you want for both front disks shipped to 91910?


Unfortunately, evaluating their condition and thus their price is going to have to wait until I get to the point where I fully strip the bike down for disposal. That is likely to be at least a couple weeks - I will have to get back to you then.

Jimmy 04-05-2020 06:07 PM

Good afternoon, I just bought a 02 with 8k on it a couple of week’s ago & would love to pick up the rear shock. These early rear shocks suck for my 160 lb. ass . Cheers 🍻

CB700S 04-05-2020 10:32 PM

Quote:

Originally Posted by Jimmy (Post 1365001)
Good afternoon, I just bought a 02 with 8k on it a couple of weeks ago & would love to pick up the rear shock. These early rear shocks suck for my 160 lb. ass . Cheers 🍻


I'll look into what I need to do to take it off during the week. Where do you live?

Jimmy 04-06-2020 01:12 AM

Clayton, California. San Francisco, Eastbay area.

Tfitz729 04-07-2020 06:47 PM

Wouldn't happen to have the seat by any chance would you?

CB700S 04-08-2020 04:15 PM

Quote:

Originally Posted by Tfitz729 (Post 1365157)
Wouldn't happen to have the seat by any chance would you?


I do and it's the stock seat, but it has a rip or two in it. Foam seems reasonably intact on it. I'll get pictures when I get over to where I've got it stored later in the week - trips are limited due to COVID-19 lockdown in my city.

Tfitz729 04-08-2020 04:21 PM

Quote:

Originally Posted by CB700S (Post 1365227)
Quote:

Originally Posted by Tfitz729 (Post 1365157)
Wouldn't happen to have the seat by any chance would you?


I do and it's the stock seat, but it has a rip or two in it. Foam seems reasonably intact on it. I'll get pictures when I get over to where I've got it stored later in the week - trips are limited due to COVID-19 lockdown in my city.


Yeah if you could send a few pics that would be awesome. I'm just looking for a second one so I can get mine redone. Its riding season where I'm at and don't want to be with my bike lol.

Jimmy 04-08-2020 04:40 PM

Do you know what you might want for that rear shock ?

CB700S 04-10-2020 12:04 PM

Quote:

Originally Posted by Jimmy (Post 1365233)
Do you know what you might want for that rear shock ?


Not yet, sorry. I'm going to try to get over there this weekend for photos and see what condition everything is in.

Toybuilder73 04-14-2020 04:38 PM

Do you have a title for the frame? If so what would you want for the title and frame shipped to 53563? Thanks

CB700S 04-14-2020 08:55 PM

Quote:

Originally Posted by Tfitz729 (Post 1365231)
Yeah if you could send a few pics that would be awesome. I'm just looking for a second one so I can get mine redone. Its riding season where I'm at and don't want to be with my bike lol.


Here's some pictures of the seat. It is in worse shape than I had thought. I'd suggest using this one as a seat pan for DayLong or Sargent to rebuild. Pics are clickable for higher res versions.



https://live.staticflickr.com/65535/...57019933_z.jpg


https://live.staticflickr.com/65535/...ea86b5d7_z.jpg


https://live.staticflickr.com/65535/...2c3cd00d_z.jpg


https://live.staticflickr.com/65535/...8fa548e5_z.jpg


There's some foam missing from under the big tear at on this one:
https://live.staticflickr.com/65535/...0223e4db_z.jpg

As shown here:
https://live.staticflickr.com/65535/...c99ca4dd_z.jpg


https://live.staticflickr.com/65535/...8c12715d_z.jpg

CB700S 04-14-2020 09:01 PM

Quote:

Originally Posted by Toybuilder73 (Post 1365485)
Do you have a title for the frame? If so what would you want for the title and frame shipped to 53563? Thanks


I do have a title for the frame but am uncertain if I want to sell it at the current time. At the very least, I'll be holding onto it until it's all but completely dismantled, which due to the lockdown in Dallas may be a while. If you need one immediately, there's several titled frames on eBay at current.

CB700S 04-14-2020 09:04 PM

Quote:

Originally Posted by Jimmy (Post 1365001)
Good afternoon, I just bought a 02 with 8k on it a couple of weeks ago & would love to pick up the rear shock. These early rear shocks suck for my 160 lb. ass . Cheers 🍻


Here's the shock that's on the bike:


https://live.staticflickr.com/65535/...e2aac5ec_z.jpg


https://live.staticflickr.com/65535/...8a2357a9_z.jpg


https://live.staticflickr.com/65535/...037b7bfe_z.jpg

Tfitz729 04-14-2020 09:41 PM

Hey thanks for the pics and yeah that's what I was thinking. Like I said I just don't want to not be able to ride my bike while it's being done. How much would you want for it?

CB700S 04-14-2020 10:23 PM

Quote:

Originally Posted by Tfitz729 (Post 1365519)
Hey thanks for the pics and yeah that's what I was thinking. Like I said I just don't want to not be able to ride my bike while it's being done. How much would you want for it?

Ones in not dissimilar conditions on eBay seem to be about $140 at current. How about $80 plus actual packing and shipping (the latter is surprisingly expensive these days, having shipped a seat in the last few years) to wherever?

Jimmy 04-15-2020 01:35 AM

Do you know how much you want for the rear shock ?

DaveRyanUSA 2018 04-15-2020 06:00 PM

Hi,

Do you know how much you want for the Front and Rear Wheels. Just the rims, don't really need tires, Brake discs.

Thanks

CB700S 04-15-2020 06:06 PM

Quote:

Originally Posted by DaveRyanUSA 2018 (Post 1365541)
Hi,

Do you know how much you want for the Front and Rear Wheels. Just the rims, don't really need tires, Brake discs.

Thanks


I am keeping the wheels as spares, sorry.

CB700S 04-15-2020 06:09 PM

Quote:

Originally Posted by Jimmy (Post 1365525)
Do you know how much you want for the rear shock ?


I had a number in mind, but there's people on eBay selling it for much less, in better shape, with free shipping, than I'd let it go for. Sorry.


https://www.ebay.com/itm/04-Honda-Ho...gAAOSwtUpelRRX

Jimmy 04-15-2020 07:36 PM

Yep, I saw that. I’m planning on going with the ReWorked F3 Shock “DMR” has going online for $350 ish. When we all get back to work. Looking for a quick fix for the rigid I’m running now. I’ll check eBay availability, if not you got a number?

Jimmy 04-16-2020 12:16 AM

Are you going to let it go ? For what $100,$150,$200 ?

CB700S 04-16-2020 06:25 AM

Quote:

Originally Posted by Jimmy (Post 1365559)
Are you going to let it go ? For what $100,$150,$200 ?


The number I'd had in mind was $120, because that was the core price for an internally modified version of the 04 shock that a (locally well regarded) suspension shop was offering. At the same time, I don't want a fellow forum member to feel ripped off as the eBay price for one is much lower, so I made the post and linked the eBay auction.

Jimmy 04-16-2020 10:36 AM

I thank you for that consideration, I’ve lost out on two online & am becoming a lil frustrated. Come Monday, if I still need one, I would be happy to give you $120 if it’s still available. Thanks for your time, stay safe & happy trails !

sinkey.cj 04-16-2020 10:53 AM

Center Stand?
 
I'd like to buy the centerstand if it has one

CB700S 04-16-2020 06:16 PM

Quote:

Originally Posted by sinkey.cj (Post 1365575)
I'd like to buy the centerstand if it has one


It does not have a centerstand, sorry.

arnablaze 04-16-2020 06:32 PM

Id be interested in the rear fairing and maybe front fender if they are not busted. I have a low mileage 04 Im trying to put back together.

CB700S 04-16-2020 06:45 PM

Parting Out 2004 919
 
Quote:

Originally Posted by arnablaze (Post 1365591)
Id be interested in the rear fairing and maybe front fender if they are not busted. I have a low mileage 04 Im trying to put back together.


The rear fairing is scratched but not busted. However, the little knurled screw thread inserts that you screw the taillight brackets into pulled out (as they do on a lot of these things) and will have to be epoxied back into their molded towers - which are intact, not broken. Pictures can be seen here: https://flic.kr/s/aHsmMCGSw2


Please note that the thing was a bit grimy on the inside and hadn't been completely cleaned out when these pics were taken.


I *think* the previous owner cracked the front fender, but I can go check it the next time I'm over to my storage unit. I can epoxy the little ferrules back in place prior to shipping if desired but I wanted to be completely transparent as to condition, etc.

arnablaze 04-16-2020 08:22 PM

Sent you message


Sent from my iPad using Tapatalk

CB700S 04-16-2020 09:00 PM

Quote:

Originally Posted by arnablaze (Post 1365597)
Sent you message


Sent from my iPad using Tapatalk




Got it, replied, will do further discussion in private messages.

InterferonAlpha 05-06-2020 07:06 PM

Hi,
Are you selling: the gunmetal right side cover and the bolt (and any extra bolts); and the speedo sensor?

CB700S 05-07-2020 12:36 AM

Quote:

Originally Posted by InterferonAlpha (Post 1366329)
Hi,
Are you selling: the gunmetal right side cover and the bolt (and any extra bolts); and the speedo sensor?


I could sell you the speedo sensor, but that is actually better bought brand new. They seem to fail based more on time and less based on mileage. They seem to last around 15 years in this case before getting erratic.


The big plastic right side cover on an 04 is asphalt black, not gunmetal, from the factory. I also don't think I have any of those. There's a silver/gunmetal metal heat shield mounted to the airbox assembly, is that what you're looking for?


All times are GMT -7. The time now is 12:42 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.

vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright © 2006 - 2010 Wrist Twisters. All rights reserved.

 
For the best viewing experience please update your browser to Google Chrome