|Topic Review (Newest First)|
|07-18-2011 01:25 PM|
+1^^^^^ Just put it in two weeks ago and unsoldered the resistors from my Rizoma LED's to save space in the headlight bucket for the Koso gauge. No issues so far.
I should have done this from day UNO. Would have saved me a ton of time.
|07-18-2011 01:23 PM|
yup. Its the ELFR-1
buy it directly from custom led. your better off and they take paypal. always quick shipping
Custom LED Electronic LED Flasher Blinker Relay - Plug And Play
|07-18-2011 09:21 AM|
|rmb||^^ That's the one. Check CLED's site too.|
|07-18-2011 06:34 AM|
Is this it? and a fair price?
Custom LED Universal Flasher Relay for Aftermarket LEDs /Signals [ELFR-1] : Bayside Performance, Canadian Source for 98-2010 Motorcycle Parts, Sportbike Accessories And Apparel
Also I will be changing the rear to smaller, and possibley LED units. Bayside notes the following:
NOTE: In some rare instances, when there are NO incandescent loads on the blinker system (LEDs front and rear), one pair of our Stage I Load Equalizers will also be required to prevent a wide range of blinker problems. These problems are all associated with a lack of resistive load on an all-LED blinker system that was designed for incandescent lamps. Problems such as, but not limited to: the 4-way blink problem (both sides blinking at the same time), the no-blink problem, and Integrated LED Tail Lights staying in "blinker mode" due to non-zero blinker voltages.
Anyone have this setup?
|07-17-2011 10:11 PM|
Originally Posted by benr View Post
|07-17-2011 09:18 PM|
Originally Posted by CB700S View Post
|07-17-2011 08:38 PM|
Originally Posted by beefsalad View Post
|07-17-2011 08:09 PM|
|beefsalad||Be a rebel, do it the hard way and install a resistor in-line.|
|07-17-2011 07:11 PM|
|boogunoogun||custom led flasher relay. plug and play|
|07-17-2011 06:01 PM|
|rmb||Solid state flasher will fix your issue.|
|07-17-2011 05:15 PM|
mirrors w/ turn signals blinking too fast
I have a set of mirrors with intergrated LED signals on them (cheapys). I need to slow them down, as they blink very fast. I remember doing this before for my old cbr for the rear tail. I used resistors, but can not remmeber what type and where to get them.
Any sugestions? I want to get it locally so I am not waiting on parts, automotive stores etc