Sportbike Forums on WristTwisters banner

Reaction score
245

Profile posts Latest activity Discussions Showcase items About

  • · Registered
    Joined
    ·
    34 Posts
    Rob, looking through the forums I have noticed that you are a guru with the 919. I am having a problem with mine. two weeks ago the bike was getting hard to start. I rode home after work and took the battery to an auto parts store to have it checked, it was good. I put the battery back in and now the bike will turn over but wont fire. I sprayed starter fluid in the intake, fired up for a second and died. So I have spark. The fuel pump is turning on, but this is as far as I have gone. Any ideas on what to look at next?

    · Old, Bold rider
    2002 Honda 919, 1976 Yamaha XT500 cafe, TC-JAG TZ250
    Joined
    ·
    2,503 Posts
    The installation is pretty straightforward depending on how wide you want them. Narrower than 25" requires a different clutch cable (for a Honda 750 Nighthawk from Motion Pro) that runs over the top of the triple clamp. Other than that the wires and brake line are more than long enough.

    The inside diameter of the handle tubes is 0.748", and frankly I don't know the ID of the stock bars, so can't say if the original bar end weights / attachments can be made to work.

    Rob

    · 2fas4MEnow
    Joined
    ·
    90 Posts
    give me all details necessary to get THAR BARS for my 07 919........how difficult is the install ? any cable or wire issues ? ...bar end diameter ? bar mirror friendly ? thanks Jack

    · Registered
    Joined
    ·
    34 Posts
    Hi Rob,

    I have purchased a Koso RX2N gauge for my 919 and have been folllowing the threads which talk about install and your low fuel LED. I would very much like to purchase one from you if available. Can you let me know if you have one and how much it would be? Thank you very much,
    George (Austin 919er)

    · Old, Bold rider
    2002 Honda 919, 1976 Yamaha XT500 cafe, TC-JAG TZ250
    Joined
    ·
    2,503 Posts
    As it happens I have sufficient components for several sets of bars, but nothing assembled at the moment. PM follows.

    Rob

    · Registered
    Joined
    ·
    43 Posts
    hey Rob, just ordered a set of bars from your website. Leave them long, I will cut them when i am happy with thier position. THANKS, Ron.

    · Registered
    Joined
    ·
    43 Posts
    Hey Rob, Im interested in a set of your bars. Could you PM me with some info? Thanks. Rona

    · McTavish
    Joined
    ·
    6,873 Posts
    Hi Rob,
    If you could advise further re my query to you following your most recent posting into Naked - Brakes ??? , I, and surely many others also too, would really appreciate it.

    Thanks,
    McRomo44
    Sandy Sutherland in Calgary
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top