Sportbike Forums on WristTwisters banner

meter problem

1K views 3 replies 3 participants last post by  royong 
#1 ·
hi Guys/Gal,

My speedo and tachometer just died on me. It was about to reach 100,000km before it happened. FI,neutral light and back light is no longer working. But Hi-beam, signal, HISS light is still working.

all fuse is still working fine, I check using a ohm meter.

unplug pc3 to reconnect back the ecu. still same problem.

Any 1 encounter this problem before?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top