FOR SALE TOGETHER AS A KIT
Item 1: Rizoma Handlebars - Conical 29-22mm [MA005]
Item 2: Rizoma Conical Handlebar Adapter [AZ405B]
Fits: Honda 919/599 & many other motorcycles
with 22mm bar clamps
Handlebar Color: silver/neutral anodized
Conical Adapters Color: black anodized
Condition: Used but in GREAT condition. Never crashed or dropped. Absolutely straight.
Price: $135 USD delivers it to you in the lower 48 states. Buyer outside lower 48 states is welcome, PM me and we can work out shipping.
Notes: These, like new Rizoma handlebars, have been trimmed down 24mm on each side. I found they felt too wide for me on the Honda 919. I am 5' 11" tall with average length arms and legs. I wanted lighter handlebars with the quality and vibration dampening of aluminum but did not want to change the seating position. Also, I did not want aluminum bars with the same rise as the OEM bars. This setup allows a lower rise conical handlebar, maximizing vibration dampening, while only changing the stock seating position ever so slightly in the the direction of more sporty. In fact. rotating the bars back from where I had them, would have allowed a virtually identical position as stock. Interestingly, the seating position on my new Kawasaki z1000 feels exactly the same as the way I had this setup adjusted on my 919. PERFECT!
Also, only one side has been drilled for the locator pin. The right side for the throttle housing. It is actually only drilled 1/8" diameter. You will need to drill it larger for stock locator pin on the throttle side and no hole exists on the clutch side.
Here is what you get.
Shown on the bike.
DAMN! Looks sweet don't it?
Mirrors are already sold, sorry. The grips and bar ends are going up for sale as a set soon but for another $55 I will include them with this sale. They will come with extra rubber skins and all the various throttle tube adapters. They are in near perfect shape. The extra rubber skins are brand new. The external part of the bar ends are in good shape, never been down or scuffed. However, the bar end mounting mechanism is a bit stretched out. It is just the aluminum mounting inserts that are stretched out. I think a good solution would be to use a large well-nut instead.
This setup would run you $213 new for the bars and adapter and $314 for bars, adapters, grips and bar ends, from PJ's Parts
.. plus shipping. Great place to get em new.. it is where these came from... but buy mine and save some scratch.
If interested, PM me.
Thanks for looking!