**CLOSED** FS: Clear Alternatives Smoke Lens and LED Board w/integrated turn - Wrist Twisters
 
Thread Tools Display Modes
post #1 of 8 Old 01-26-2011, 12:03 AM Thread Starter
Church of the Holy Smoke
 
MotoCycho's Avatar
 
Join Date: Jan 2006
Location: SLC, UT
Posts: 1,085
Rep Power: 1
 
**CLOSED** FS: Clear Alternatives Smoke Lens and LED Board w/integrated turn

Fits: 2002+ Honda 919(CB900F) & 2003-06 599(CB600F) - please be sure for fitment on the 599/CB600, I have a 919.

Item 1: Clear Alternatives Smoke Lens
Color: smoke translucent
Condition Lens: Used - Good
Price for Lens: $30 delivers it to you in lower 48 states. Basically half price of new, delivered!
Lens isn't perfect.. has a few scratches and tiny chips since it hangs out the back side and catches crap off the back tire. See pictures below. Click to view larger image.

Item 2: Clear Alternatives LED board w/ integrated amber turn signals
Color: Red tail/brake & amber turn signal LEDs
Condition LED board: Used - 100% working basically perfect condition
Price for LED Board: $65 delivers it to you in lower 48 states.
LED board is pretty much perfect and works flawless. The tail/brake is plug n play.. the left/right wires have to be tapped into your harness somehow. It is easy!

Deal for for both Smoke Lens and LED board together? You bet!
$85 delivers them both to you in lower 48 states.










What do these cost new?
Smoke Lens $40 new + shipping
LED board $90 new + shipping.

My asking price too high? Please, make me an offer. I will consider all offers.

PM me if interested. Thanks for looking!

- Rev. CYCHO -

tires.... it's what's for dinner!
MotoCycho is offline  
Sponsored Links
Advertisement
 
post #2 of 8 Old 01-26-2011, 10:27 AM
The Cripple
 
Pvster's Avatar
 
Join Date: Nov 2009
Location: Phoenix
Posts: 8,765
Rep Power: 1
 
reason for selling? just curious.

Pvster is offline  
post #3 of 8 Old 01-26-2011, 11:08 AM Thread Starter
Church of the Holy Smoke
 
MotoCycho's Avatar
 
Join Date: Jan 2006
Location: SLC, UT
Posts: 1,085
Rep Power: 1
 
Quote:
Originally Posted by Pvster View Post
reason for selling? just curious.
bought a new motorcycle.. 2011 Kawasaki z1000. put the stock tail light and other stuff back on the 919 to sell the bike as close to stock as I can get it.

- Rev. CYCHO -

tires.... it's what's for dinner!
MotoCycho is offline  
 
post #4 of 8 Old 01-26-2011, 11:38 AM
duc duc GOOSE!
 
HondaCrazy's Avatar
 
Join Date: Jul 2008
Location: PA
Posts: 946
Rep Power: 1
 
would love this, if only my car didnt just incurr a large repair bill : /

14 Ducati Monster 1200, termi's
07 VFR Anniversary Edition-SOLD
02 919-SOLD
01 CBR F4i-SOLD
02 CBR F4i-SOLD
92 Kawi EX 500-SOLD
HondaCrazy is offline  
post #5 of 8 Old 01-26-2011, 01:08 PM
Tirone
 
Join Date: Aug 2010
Location: Maryville,Tn.
Posts: 63
Rep Power: 1
 
would the signals show up well through the stock lens? Did you have to install diodes or other voltage regulator? Thanks.

old smoky is offline  
post #6 of 8 Old 01-26-2011, 03:14 PM
rmb
Let's go!
 
rmb's Avatar
 
Join Date: Aug 2009
Location: Sussex Couty NJ
Posts: 7,650
Rep Power: 1
 

Awards Showcase
Wrist Twisters Event Attendance Wrist Twisters Event Attendance Wrist Twisters Event Attendance Wrist Twisters Event Attendance 
Total Awards: 9

I could be wrong but I don't think you would see the turn signals properly through a red lense.

rmb is offline  
post #7 of 8 Old 01-26-2011, 03:50 PM Thread Starter
Church of the Holy Smoke
 
MotoCycho's Avatar
 
Join Date: Jan 2006
Location: SLC, UT
Posts: 1,085
Rep Power: 1
 
Quote:
Originally Posted by old smoky View Post
would the signals show up well through the stock lens? Did you have to install diodes or other voltage regulator? Thanks.
No diodes or new voltage regulator. LED's are polarized and these are 12v. I think you actually mean resistors to slow the flash rate down. I did not have to install resistors because I used a transistorized/electronic flash relay, which is advised to use when running LED turn signals. I believe I have some appropriate resistors and if I can find them I will toss them in.

Quote:
Originally Posted by old smoky View Post
would the signals show up well through the stock lens? Did you have to install diodes or other voltage regulator? Thanks.
I can't say for sure since I always used the Smoke lens with this LED board.. but they are very bright and CA sells the board without a lens. Which made go look at their website and I have made an error on the cost. It looks like the LED board includes the lens.. so I messed up.

I will re-list this item with a lower price. Sorry guys!

Admin, you can delete this posting as in accurate.

Thanks,

- Rev. CYCHO -

tires.... it's what's for dinner!
MotoCycho is offline  
post #8 of 8 Old 01-26-2011, 04:11 PM Thread Starter
Church of the Holy Smoke
 
MotoCycho's Avatar
 
Join Date: Jan 2006
Location: SLC, UT
Posts: 1,085
Rep Power: 1
 
please see new listing with the word "re-list" in the subject line.


Admin,

Please delete this post.



Thanks,

- Rev. CYCHO -

tires.... it's what's for dinner!
MotoCycho is offline  
 

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Wrist Twisters forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 
For the best viewing experience please update your browser to Google Chrome