**FOUND**: 919 Rear Brake Pedal

[CB700S]

Looking for a rear brake pedal - mine's still working but has seen better days, thank you GDPO. Would consider buying entire stock rearsets if needed.

[garyb900]

If someone on here doesn't have one for you there's one on ebay for less than retail. I'm at work now so I can't get a link but I will check back later.

[CB700S]

Originally Posted by garyb900

If someone on here doesn't have one for you there's one on ebay for less than retail. I'm at work now so I can't get a link but I will check back later.

Someone bought that one this morning.

[mcromo44]

Originally Posted by CB700S

Looking for a rear brake pedal - mine's still working but has seen better days, thank you GDPO. Would consider buying entire stock rearsets if needed.

They respond very well to being bent back to proper shape, if that is the major driver for your search.
A vise and a couple of crescent wrenches can yield excellent results, compound bends included. An engineers hammer (or big ball peen) is the only other tool I used, re some flattening that was needed.

[CB700S]

I already bent it back, but it is starting to rust and the weld at the peg is suspicious. Since this is my daily driver, I just want to get another one, powder coat it, swap it out and go.

[LucilleBrawl]

I have a slightly bent one you can have for free. I haven't bent it back into shape or anything.

[CB700S]

Originally Posted by LucilleBrawl

I have a slightly bent one you can have for free. I haven't bent it back into shape or anything.

PMing you now.

[CB700S]

Picked this one up from Lucille - mods can close this one as found now, thanks.