PC3 Custom Map for 900RR setup.
I've had several people ask about my custom map, I can't seem to get it attached here so I am just going to put it on my web site MachMoto for all to access.
It is at the bottom of the page in the attachments.
Enjoy!
It is at the bottom of the page in the attachments.
Enjoy!
Total Comments 21
Comments
-
Thanks a lot man!Posted 07-12-2009 at 05:05 PM by DrEw A O8 
-
I take it you found it? Let me know if the download works? I'll still email it to you too.
Posted 07-12-2009 at 08:27 PM by Ripper
-
Downloaded and ported perfect... Thanks!
Posted 07-12-2009 at 08:31 PM by DrEw A O8
-
Now... let me know how it performs for you.
Posted 07-13-2009 at 07:56 AM by Ripper
-
Oh man, I wish I could find my custom map.....
It used to be on the DynoJet site, but was pulled way back when during some housecleaning.
I'll take another look around -
Thanks for sharing that map, it really helps people out.Posted 07-16-2009 at 02:15 PM by UJM
-
What pipe was on with this map?
Posted 07-30-2009 at 03:07 PM by WheelieTime
-
It is a custom pipe I had made for me. It would be comparable to the sato GP can for tuning.
Posted 07-31-2009 at 05:41 AM by Ripper
-
Well I am going to try it with no can. I can't afford a can right now and I really want to put this header on so I am gonna slash cut it by my right foot and try your map.
Posted 07-31-2009 at 07:33 AM by WheelieTime
-
It should be pretty close for you. My can is a 2 1/2" inside OD, so basically its pretty much the same.
Posted 07-31-2009 at 07:44 AM by Ripper
-
Great Map! Runs perfect on the 919 with no mufflers. Thanks alot man!!!!!!
Posted 08-01-2009 at 04:44 PM by WheelieTime
-
finally got all setup.... map works perfect! thanks
Posted 08-02-2009 at 01:47 AM by DrEw A O8
-
Right on, I can use this. I got my PC used and don't have a cable or instructions though any advice on how to remedy that?
Posted 08-06-2009 at 10:49 PM by brian
-
Thanks a lot for putting that map up on MachMoto.com. I have the stock air filter and a D&D can on a 900rr header. That map, IMO, made a good change on the bike. It was definitely better than the previous map.
Posted 08-07-2009 at 10:37 PM by Heath
-
It is just a USB cable. I forget what the PC3 end is called but I believe it is the same one that my Blackberry uses?Quote:Originally Posted by brian
Right on, I can use this. I got my PC used and don't have a cable or instructions though any advice on how to remedy that?
I'm sick as a dog today so I'll go out and check it when I'm feeling a little better.Posted 08-08-2009 at 01:02 PM by Ripper
-
I'm an Idiot! The cable is sitting right here next to me still in the original package... It is a "USB2-6MIN"Quote:Originally Posted by brian
Right on, I can use this. I got my PC used and don't have a cable or instructions though any advice on how to remedy that?
Posted 08-08-2009 at 01:04 PM by Ripper
-
alright so I got the software and i'm guess im gonna order a cable best buy wanted 36 dollars!!!!
I have a pcIII its the non usb one and I cant seem to get the file posted on your site to download in anything but internet explorer then it doesnt open and wont allow me to import it into my software??
Any ideas? , thanks.Posted 08-18-2009 at 06:43 PM by brian
-
don't use IE, try firefox instead. Don't order the cable, I can either build you one or send you one (if I have the right type)
I'm not having any luck finding the type of cable it would use, since most units are USB. Just let me know what you need!Posted 08-19-2009 at 05:07 AM by beefsalad
-
the cable is a usb on one side and a serial port on the other. The serial port side has 9 pins and its common on older computers.
I'll try firefox here in a bit, like I said I have the software so maybe its just a matter of pluggin the commander in so the comp has something to talk to....
Thanks!Posted 08-19-2009 at 09:46 AM by brian
-
Posted 08-19-2009 at 11:51 AM by beefsalad
-
sweet thanks
Posted 08-19-2009 at 05:49 PM by brian
